background image

your child's safety is your responsibility

If you have a problem with this product or require replacement parts, 
please contact  your nearest Mothercare store or telephone the 
Mothercare customer care line on 

08453 30 40 30

Alternatively write to:

Customer Care
Mothercare
Cherry Tree Road
Watford
Herts.  WD24 6SH

www.mothercare.com

All Assembly fittings should be tightened properly and regularly checked for security.

Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas 
fires, etc. in the near vicinity of the wardrobe.

safety notes

Periodically check all fittings to ensure that none have come loose.

The bed can be cleaned by wiping with a damp cloth and drying with a soft dry cloth.

Never clean with abrasive, ammonia based, bleach based, or spirit type cleaners.

Take care when handling or moving the bed.

care of your product

Careless handling can damage wooden furniture.

Pop

Cabin Bed

user guide

IMPORTANT -  READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

Содержание Pop Cabin Bed

Страница 1: ...checked for security Be aware of the risk of open fire and other sources of strong heat such as electric bar fires gas fires etc in the near vicinity of the wardrobe safety notes Periodically check all fittings to ensure that none have come loose The bed can be cleaned by wiping with a damp cloth and drying with a soft dry cloth Never clean with abrasive ammonia based bleach based or spirit type c...

Страница 2: ... 1 Insert the door hinges into the large holes in the door and secure each with the 2 pre fitted hinge screws see fig 12 2 2 To attach the door fit hinge slot A under bolt B and tighten bolt B Door adjustment may be made by slackening bolt B slightly and either tightening or loosening screw C as appropriate Finally re tighten B and the screws holding the hinge mounts to the side panel Attach the 4...

Страница 3: ...ms that attach the drawer fronts to the sides should be loosened to make it easier to fit the backs 3 Use 2 screw bolts 40mm and 1 small cam to fully attach the back and secure the construction of each drawer Make sure that all drawer cams are rotated clockwise and fully tightened Complete stages below 1 to 3 for both Drawers Finally place each drawer into the main assembly ensuring that the pre f...

Страница 4: ... each of the pre fitted metal inserts in each end Ensure the bolts are only screwed in half way so that they are easier to locate onto the brackets Slide brackets downwards to engage onto bolts Tighten the bolts to secure the product Attach the 2 remaining drawer runners to the inside face of the large end using the 8 remaining short screws 10mm Please refer to fig 5 for more detailed information ...

Отзывы: