9
Installation/Owner’s Manual 20201109
For Warranty Service Call 833-474-0367
OPERATING INSTRUCTIONS
Lighting, Relighting, and Shutdown Instructions
To light the oven, just switch the power switch at the top left corner of the control panel to the “ON”
position. (The oven is equipped with a direct hot surface ignition system. There is no standing pilot to
light.)
If the burners fail to ignite within four seconds, the oven will automatically shut off the gas, wait five
minutes to allow the gas that was released to dissipate, and try to light the burners again. If the burners
still fail to ignite after three such attempts, the oven will stop trying, even though the power switch is in
the
“ON” position. To continue to attempt to light the burners, turn the power switch “OFF” and then “ON”
again.
To shut down the oven, switch the power switch to the “OFF” position. For a complete shutdown, also
open the control panel and turn the manual shut-
off valve to the “OFF” position.
Power Switch:
Switch ON to use the oven, switch OFF
when done using the oven.
Cook Timer:
Turn the knob to set a time duration. An
alarm will sound when the timer runs out.
Turn the knob to OFF to cancel the alarm.
The timer is a reminder to the user; the timer
does not control the oven.
Fan Mode:
In COOK mode, the fan runs continuously
except when the doors are open. The fan
does not cycle with the operation of the
burners. In COOL mode, the fan runs
continuously even if the doors are open.
To rapidly cool the oven after cooking is
completed, open the doors and switch the
fan mode to COOL. The COOL mode has
the same function as the COOK mode
when the doors are closed.
HEAT-ON Indicator:
The HEAT-ON indicator will light when the
burners are on and will remain on while the
oven is heating.
Power Indicator:
It illuminates when the power switch is in ON
position.
HI/LOW Fan Speed:
Use to select fan speed (HI or LOW). The
appropriate speed is determined by the type of
food being cooked.
Cook Temperature Control:
Turn the knob to desired temperature.
When the set point is reached, the HEAT
ON indicator will be off. When the burners
maintain in the set temperature, the
indicator will cycle on or off.
Oven Interior (Momentary) Light Switch:
Press and hold to turn on the light.
The light is controlled independently.
