21
Low or no catch
If not getting bitten
1) Mosquitoes may not be out
yet.
If getting bitten
2)
Trap placement issue.
3) CounterFlow may be
disrupted.
1) Verify temperature is consistently
above 1O
/
C(50
/
F).
2) Follow steps in the “Trap
Placement” section of your owner’s
manual included with your Mosquito
Magnet® Liberty Plus.
3) A
ir
flow may be restricted. Call
Customer Service at 1-800-800-1819.
LED Flashing alt
RED/GREEN
High Temp
1) Turn off trap and allow to cool for
1/2 hour. Then restart. If code
continues, call Customer Service at:
1-800-800-1819
.
LED Flashing alt
RED/ORANGE
Battery Voltage Low
1) Make sure you have charged the
battery for 24 hours before starting
trap for the first time out of the box,
and the first time before each season.
2) Check all battery connections,
make sure they are fully inserted.
3) After several repeated unsuccessful
attempts to start your Mosquito
Magnet® Liberty Plus the battery may
need to be recharged.
For accessories go to: www.mosquitomagnet.com.
GAS RESET TOOL INSTRUCTIONS
Gas Reset Tool (patent pending) should be used every time tank is refilled, before
connecting tank to regulator. If your Mosquito Magnet® Liberty Plus fails to start, it may
be the result of poor gas flow from the propane tank through the regulator to the trap. The
Gas Reset Tool has been designed to reset the internal mechanisms of the propane
regulator and release any back pressure from your propane tank. Please follow these
steps:
1- Shut down your Mosquito Magnet® Liberty Plus.
2- Completely close the propane tank valve by turning to the “Off’ position. (turn valve
clockwise)
3- Disconnect the regulator from the propane tank valve.
4- Screw the threaded end of the reset tool into the propane tank valve until it is fully
engaged. You may hear a small “hiss” sound. This is the pressure being released from the
