2
STEP 2:
Register your trap
3.1 -
Go to your internet browser & visit
www.mosquitomagnet.com/product-registration
to register your trap using
the serial number on the trap and the MAC address located on the outside of
the Commander trap box or underneath the trap's handle.
3.2 -
Create an account if you have not already done so. Make sure to use the
same email address for your product registration and My Account information.
Full instructions available at
www.mosquitomagnet.com/Commander-Manual
1
2
3
4
5
6
7
Blinking 91, 92, 93, 95
91
92
93
94
95
Flashing COOL with
Thermometer Icon
Bag Half Full
Bag Full
Knocked Over
Theft Alert
5 Days of Gas Left
Tank Empty
Plume Thermister Error
Trap is connecting
Computer cannot connect
to trap
Low Ambient Temperature
Trap Display Trap Status
Action Required
1. Check to make sure you have a replacement net.
1. Replace with new net.
1. Reposition trap properly.
2. Unplug & plug-in battery.
3. Turn trap back ON.
1. Replace with full tank and/or press and hold
mode button on trap to select Gas Saver Mode.
2. Reset Tank Status in the Control
Panel on the web interface.
1. Contact Customer Care at
1.877.224.1538.
None, no numbers should show after a minute.
1. Automatic wireless set-up failed.
Visit support.mosquitomagnet.com/help or
call 1.877.224.1538
1. Reset trap on web interface.
2. Trap will automatically restart when ambient
temperature rises above selected temperature.
STEP 3:
Serial Number
CMXXXXXXXXXXXXX
MAC Address
XX:XX:XX:XX:XX:XX
