C O M M A N D E R
8 7 7 - 2 2 4 - 1 5 3 8
QUICK START GUIDE
This guide illustrates how to set-up and connect your
Mosquito Magnet® Commander trap to the internet.
• Assemble the trap, including the antenna
• Fully charge the battery overnight
Install the Wireless Access Point (WAP):
Before you begin, be sure to:
Note: If the trap’s LCD screen displays a Service Error Code (2-digit number) for
longer than 2 minutes, refer to the back of this guide for trouble-shooting steps.
1
Connect your trap and place in yard.
2.1 -
Plug in your Commander trap's battery.
The trap will automatically connect to the
Wireless Access Point.
The trap will display a series of numbers for up
to a minute. After 1 minute, no numbers should
show.
2.2 -
Place your trap upwind in between mosquito breeding
areas (standing water, bushes) and people areas (patio, deck)
making sure it's at least 30-40 feet away from human activity
and no more than 250 ft. away from the WAP.
Visit www.mosquitomagnet.com for details on trap place-
ment.
2.3 -
Connect a full 20 lb. propane tank.
2.4 -
Turn trap "ON".
30-40 ft
250 ft
LAN 1
LAN 2
POWER
LAN 1
LAN 2
POWER
LAN 1
LAN 2
POWER
LAN 1
LAN 2
POWER
LAN 1
LAN 2
POWER
LAN 1
LAN 2
POWER
STEP 1:
STEP 2:
1.1 -
Assemble WAP antennas.
1.2 -
Connect the network cable from
the WAP to your router using either
LAN1 or LAN2.
1.3 -
Connect the WAP's power cord
into an outlet.
LAN 1
LAN 2
POWER
