9
2.
In addition ensure that the lowest portion of the module is placed high enough so
that it is not shaded by trees or plants and not damaged by sand or stone driven
by wind.
3.
The supporting frame/structure is used to mount modules at correct tilt angles.
4.
Clearance between the modules frame & the mounting surface is required to
prevent the junction box from touching the surface & to allow cooling air to
circulate around the back of the module. This also allows any condensation or
moisture to dissipate.
1.
Roof mounted PV modules should be mounted on a fire resistant roof.
2.
Installation should be carried out in calm winds to prevent accident due to fall.
3.
Special construction or structures may be required to help provide proper
installation.
4.
Both roof construction and module installation design have an effect on the fire
resistance of a building. Improper installation may contribute to fire hazards.
Roof Mount(Tilt Roof/Wall Installation)
