Moseley Event 5800 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 86

background image

Event 5800 Installation & Reference Manual

ii

© 2012 Moseley, Inc. All Rights Reserved.

602-16620-01, Rev. A

© 2012 Moseley, Inc. All Rights Reserved.
This book and the information contained herein is the proprietary and confidential

information of Moseley, Inc. that is provided by Moseley

exclusively for evaluating the

purchase of Moseley, Inc. technology and is protected by copyright and trade secret

laws.
No part of this document may be disclosed, reproduced, or transmitted in any form or by

any means, electronic or mechanical, for any purpose without the express written
permission of Moseley, Inc.
For permissions, contact Moseley Marketing Group at 1-805-968-9621 or 1-805-685-
9638 (FAX).
Notice of Disclaimer: The information and specifications provided in this document are

subject to change without notice. Moseley, Inc. reserves the right to make changes in
design or components as progress in engineering and manufacturing may warrant.
The Warranty(s) that accompany Moseley products are set forth in the sales
agreement/contract between Moseley and its customer. Please consult the sales

agreement for the terms and conditions of the Warranty(s) provided by Moseley. To
obtain a copy of the Warranty(s), contact you Moseley Sales Representative at 1-805-

968-9621 or 1-805-685-9638 (FAX).
The information provided in this document is provided “as is” without warranty of any
kind, either expressed or implied, including, but not limited to, the implied warranties of

merchantability, fitness for a particular purpose, or non-infringement. Some jurisdictions
do not allow the exclusion of implied warranties, so the above exclusion may not apply to

you.
In no event shall Moseley, Inc. be liable for any damages whatsoever – including special,

indirect, consequential or incidental damages or damages for loss of profits, revenue,
use, or data whether brought in contract or tort, arising out of or connected with any

Moseley, Inc., document or the use, reliance upon or performance of any material
contained in or accessed from this document. Moseley’s license agreement may be
provided upon request. Additional Terms and Conditions will be finalized upon negotiation

or a purchase.
The above information shall not be constructed to imply any additional warranties for

Moseley, Inc. equipment including, but not limited to, warranties of merchantability or
fitness for an intended use.
Trademark Information
Java

TM

is a trademark of Sun Microsystems Inc.

Windows® is a registered trademark of Microsoft Corporation
All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.

«
1
2
3
4
...
»

Содержание Event 5800























































































Отзывы:

Нет отзывов

Похожие инструкции для Event 5800

Бренд: iHome Страницы: 2

Бренд: iHome Страницы: 16

Бренд: Yaesu Страницы: 2

Бренд: Yaesu Страницы: 2

Бренд: Yaesu Страницы: 2

Бренд: Yaesu Страницы: 69

Бренд: Hama Страницы: 18

FM RDS/DAB Digital Radio RD-50CFM

Бренд: Roberts Страницы: 20

Бренд: Audiovox Страницы: 28

Stratus 6 Zone Kit

Бренд: AMTC Страницы: 11

Бренд: Yaesu Страницы: 51

Бренд: Coby Страницы: 1

Бренд: Sirius Satellite Radio Страницы: 36

London Clock 239/7106

Бренд: Argos Страницы: 5

Бренд: Caliber Страницы: 18

Бренд: Covalue Страницы: 52

Бренд: kchibo Страницы: 4

StreamCaster 4000 Series

Бренд: Silvus Страницы: 155

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды