Mosebach X250S, Руководство по эксплуатации и обслуживанию

Страница: 12 / 15

X250S Load Bank
12
iii. Load Power (FLA1, FLA2, FLB1, FLB2, FLC1, FLC2) Fuses
These fuses are located under the lid of the load bank. They may be
accessed by removing the 6 screws on the top of the unit. The fuses can
be found on the bus bars located on the panel inside. To remove a fuse,
remove the screws attaching is to the bus bar.
b. Replacing Contactors
Contact Mosebach Manufacturing Co. if there is a contactor that needs to be
replaced.
c. Replacing Resistors
Contact Mosebach Manufacturing Co. if there is a problem with the resistors or if
a resistor needs to be replaced.
Load Power
Fuses