Mosaic QUANTIZER, Руководство пользователя

Страница: 8 / 11

USER INTERFACE
6
Operating Mode
The module functions in one of three modes at a time.
To set the operating mode, hold the shift button and press the desired mode button.
Arp
In this mode, the trig input will advance the current step in the selected scale. And allow for arpeg-
giation of a set of notes.
Pressing ARP multiple times will step through different arpeggiation modes (indicated on the furthest
left set of LEDs).
• If the first LED is illuminated the direction is from left to right.
• If the second LED is illuminated the direction is set to pendulum, and will go left to right to left,
and so on.
• If the third LED is illuminated the direction is from right to left.
• If the fourth LED is illuminated each trigger will jump to a random note.
Quant
In this mode, changes in voltage to the input jack are quantized to selected notes across the key-
board interface. This is the default mode, and is fully described in the
How It Works section above.
Tune
In this mode any signal on the In jack is ignored, to allow for tuning oscillators without having to
change scale information or unpatching. The output will be even octave increments based on the
octave offset setting.