Fill at least 23 LBS of sand (not included) into
the hole.
WARNING: THIS APPLIANCE REQUIRES INSTALLATION BY A COMPETENT PERSON.
PROPER ASSEMBLY IS THE RESPONSIBILITY OF THE INSTALLER.
ASSEMBLY INSTRUCTIONS
Step 8
Step 7
Step 7
Step 8
Fill sand into
the hole till full.
BB
CC
Hardware Used
M6 Nut
6mm Washer
BB
CC
Place the reflector assembly onto the top of the
burner head (C) and tighten with (3) 6mm washers
(BB) and (3) M6 nuts (CC).
x 3
x 3
C
Page 12 of 23
!
