Mosa TS 300 SC-SXC, Инструкция по эксплуатации и обслуживанию, каталог запасных частей

Страница: 10 / 66

ABBREVIATIONS LEGEND GE_, MS_, TS_
M
2.3
© MOSA 1.0-06/99
14/06/99 M2-3GB
°C : temperature Celsius grades
10 :10 kVA synchronous (wording example)
10000 :10 kVA asynchronous (wording example)
A : Ampere
A : ADIM engine
atm : pressure
B : pretrol
BAT : battery
BC : base current
C.A.(c.a.) : alternating current
C.B. : battery charger
C.C.(c.c.) : direct current
cc : cm³ (volume)
CE : European norm conformity
CF : special for pipe welding
CTL : slow touring trolley
CTM CTV : fast touring trolley: hand touring trolley
D : diesel
D : GFI
D : Deutz engine
E : electric start
EAS : automatic intervention panel for generating sets for
connection to the mains
EL : electronic regulation, allows to use welder and
generating set simultaneausly
EP1 : automatic accelerator according to requestedpower,
engine protection, low oil pressure, high temperature
with engine stop, troble warning lights
EP2 : engine protection, low oil pressure, hight temperature
with engine stop, trouble warning lights
EP4 : engine protection, low oil pressure, high temperature
with engine stop, no battery charge, belt broken, low fuel
level with engine stop, trouble warning lights
EP5 : engine protection, low oil pressure, high temperature
with engine stop, no battery charge, belt broken, low fuel
level with engine stop, everspeed, trouble warning lights
EP6 : Control and protection unit of generating sets. It
has operating modes OFF – MAN – AUTO It protects the
engine for low oil pressure, high temperature, belt broken,
no battery charge and low fuel level, over peed and
under speed, over and under voltage and no tarting.It
shows besides: voltage, frequency and current generator,
current battery voltage and battery charge, engine rpm.
EP6 disposes of 29 programmable parameters.
ES : oil/temperature engine protection device
EV : electrovalve
g/kwh : grams/kilowatt hour (engine consumption)
GA : asynchronous alternator
GE : generating set
GHF : high frequency alternator
GS : synchronous alternator
h : hour meter (symbol)
H : Hatz engine
H : Honda engine
HI : hydraulic central
Hz : frequency
I : single-phase auxiliary generation (symbol 1~)
IP : protection grads for electric devices against acess to
dangerous parts according to the IEC 529 norm (Internal
Protection)
kg : kilogram (mass)
K : welding cables set
kVA : kilovolt ampere
kW : kilowatt (engine power)
kWh : kilowatt hour (energy)
l : liters (capacity)
L : Lombardini engine
Lwa : maximum acoustic (power level) according to the
regulations in force
mm : millimeter (length) (measure)
m : meter (length)
mA : milliampere
MS-MSG : MOSA engine driven welder with high
frequency alternator
MT : magnetothermic switch
MT : grounding kit
MTD : magnetothermic switch / GFI
OH : heater (engine oil) for generating sets
P : plus
PAC : power electric frame
PAR : device for double
PB : battery holder
PL : „pipe line“ welding
PS : exhaust pipe extension
PW : welder for polyethylene and propylene pipes
QEA : automatic electric panel
QEM : manual electric panel
R : Ruggerini engine
RVT : voltage electronic regulator
S : symbol of EN 60974-1
S : Suzuki mengineotore
SKID : unit assembled on a base with no protection (no
fairing)
S-SC : silenced (faired) - silenced compact (faired
SX-SXC : supersilenced (faired and sound prof) -
supersilenced compact (faired and super sound prof)
T : thermic switch
TC-TCM-TCPL : remote control
TS : welder with asynchronous alternator
V : Volt
Y : Yanmar engine
Y : three-phase auxiliary generation (symbol 3~)