Mosa Magic Weld, Руководство пользователя

Страница: 56 / 164

MAINTENANCE
M
43
© MOSA 1.0-05/04
21/05/04 22243-GB
MAGIC WELD
!
!
●
Maintenance and repair work should only be done by
qualified personnel.
● Stop the engine before doing any work on the machine. If
for any reason the machine must be operated while working
on it,
be careful not to touch rotating parts, hot surfaces,
live wires, etc. which may be unprotected.
●
Remove protective guards only when necessary to perform
maintenance and replace them immediately after the
maintenance is completed.
● Use suitable tools and wear suitable clothes.
●
Do not modify the machine without prior authorization
ATTENTION
When carrying out maintenance operations
be careful to avoid polluting the environment
with the materials used during maintenance.
Follow all local health and safety regulations.
IMPORTANT
MAINTENANCE OF THE MACHINE
Maintenance refers to all operations regarding
the control and replacement of mechanical and
electrical parts subject to wear. In addition it
refers to the control and topping up or
replacement of fluids such as fuel, oil and the
regular cleaning of the machine.
Repairs refers to the substitution of worn or
damaged parts and repairs should be carried
out by Authorized Service Centres.
Refer to the Engine Manufacturer’s Manual for
the maintenance instructions for the engine.
Periodic maintenance should be performed
according to the schedule shown in this manual.
On a regular basis check that there are no
obstructions in the aspiration/exhaust ducts of
the alternator, the engine or the housing which
could restrict the flow of cooling air.
DRY AIR FILTER
Replace the air filter cartridge every 200 hours
under normal conditions and every 100 hours
in dusty environments.
PERMANENT MAGNET ALTERNATOR
No maintenance is necessary, as the alternator
has no brushes or slip rings, and there are no
devices for regulation of the output.
WARNING LABELS AND DECALS
Check warning labels and decals once a year
and
replaced if missing or unreadable.
CABLES AND CONNECTIONS
Periodically check the condition of the cables
and tighten the connections.
HOT surface
can
hurt you
MOVING
PARTS
can injure