Mortuary Lift The Ultimate 1000 Lift, Быстрый старт

Страница: 3 / 4

3. Your screen should display CAL 1 for a second and then 1000.
If it does not display 1000 please use the arrow keys to set it to
1000. Press ENTER.
4. Your screen should display CAL 2 for a second and then 1. If it
does not display 1 please use the arrow keys to set it to 1.
Press ENTER.
5. Your screen should display CAL 3 for a second and then 100.
You will need your calibration weight for this step. DO NOT
PUT WEIGHT ON MACHINE YET. Using the arrow keys enter in
the weight you are using to calibrate your machine. Press
ENTER.
6. Your screen should display CAL 4 for a second and then an
empty load weight. Please make sure the machine and straps
are not swaying. Wait until the empty load weight number is
not changing of is changing between 2 number increments.
Press ENTER.
7. After countdown your screen should display CAL 5 for a second
and then an empty load weight again. Load your weight onto
the machine. If you need to raise the load do it now. Please
make sure the machine and straps are not swaying. Wait until
the empty load weight number is not changing or is changing
between 2 number increments. Press ENTER.
8. After a countdown it should display GOOD. (If it does not, the
calibration did not work and you will need to repeat the
process. The happens most often if the load was not stable
when pressing enter on last step.)
9. When the calibration is complete it will display SAVE.
Press ENTER.