Mortuary Lift The Ultimate 1000 Lift, Быстрый старт

Страница: 2 / 4

Instructions on
Calibrating your
Load Scale
NOTE:
Your load scale was calibrated prior to shipping to your
location. Only use this procedure if your scale displays wastly in-
accurate loads. Please, first try zeroing your machine out after in -
stallation, prior to bearing a load, with Glidetec Straps attached.
BEFORE YOU BEGIN:
Please read through the procedure. you
will need the 1/4 allen wrench which was sent with the ma -
chines having a pivot. If you do not have a pivot you will need a
1/4 allen wrench or something that is about 1/4 inch in diame -
ter and at least 3 inches long (like an unsharpened pencil). You
will need a predetermined or known weight of an item or items.
We recommend at least 100 lbs.
1.
Detach display head from your
machine and find the CAL tab
on the back of the unit.
Remove the tab.
2.
With the display head turned
off, press the calibration
button with the allen wrench.
While still holding the button
down, turn the unit back on.