The Specialist In Drum Handling Equipment
Model 289C
MORStak
TM
Carriage-Mounted Drum Racker
Operator’s Manual for Morse Model 289C MORStak
TM
Carriage-Mounted Drum Racker
Serial number 269119 to ______
morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc.
Form OM289C (269119-______) (Updated 14 Jun, 2019 11:28 AM)
6
Raise the horizontal drum from the rack a few inches and back the MORStak
3.
TM
away. Lower the horizontal drum to about 48” from
the floor. Rotate the grip pad hand crank clockwise to close the grip pads tightly on the drum.
Carefully tilt the drum down to the vertical position. Lower the upright drum to the floor and when the weight of the drum is entirely
4.
on the floor, rotate the grip pad hand crank counter-clockwise to the full open position. Raise the drum holder assembly about 12”
(30.5 cm), until the rim grip pads are clearly above the top of the drum. Drive the MORStak
TM
attachment back to clear the drum.
Maintenance
Periodic inspection for the general condition of structural and mechanical components is imperative for safe and efficient operation.
•
Periodically inspect all moving parts, framework, and contact areas for signs of wear, fatigue, or loosening. Tighten, adjust, or
•
replace parts as necessary to prevent failure and maintain proper function.
Inspect the hydraulic system for oil drips, hose damage, or other signs of wear. Inspect the level and condition of the hydraulic fluid.
•
(See hydraulic pump specification sheet.) Replace any parts that show signs of wear.
Lubricate all moving parts.
•
Center of Gravity Dimensions for Calculating Lost Load on equipment
