MorseDrum.com
Copyright 2010 - Morse Mfg. Co., Inc.
Form PL510M (242094-249854) (Updated November 17, 2010 4:08 PM)
3
The Specialist In Drum Handling Equipment
Operator’s Manual for Morse Vertical-Lift Drum Pourer Model 510M
Serial Number 242094 to 249854
MODEL 510M
Vertical-Lift, 60”, with Spark Resistant Parts,
Manual Lift & Tilt
Machine Description
The Model 510M Vertical-Lift Drum Pourer will pour a drum at up to 60” high, measured
from the floor to the lowest point of a horizontal drum. It is designed to lift, transport, and
dispense a ribbed 55-gallon steel drum 22.5” in diameter, as well as a fiber drum between
22” and 23.5” in diameter. The maximum full-drum capacity is 800 Lb. The capacity is
derated to 500 Lb. for a half-full drum. The half-full rating is based on the tilt mechanism’s
capacity for handling an unbalanced bottom-heavy drum.
Options
A smaller diameter drum can be handled with the correct size 55/30M
•
Series Diameter Adaptor installed (see
The
•
Bracket Assembly
(Part # 4556M-P) is
required
to handle a
plastic drum without a top rim (see figure 2.1). It is also recommended
to more securely handle a fiber drum. You can use the Bracket
Assembly with a 55-gallon plastic, steel or fiber drum. The brace
at top and bottom of the drum prevent it from slipping lengthways
through the drum holder. It adjusts for a drum 31” to 39” tall.
The
•
Top Rim Clamp
(Part # 4560M-P) grips the upper rim of your drum to
prevent it from slipping through the drum holder (see figure 2.2). To handle
a 55-gallon plastic drum with top rim, you
must
install either the Bracket
Assembly or the Top Rim Clamp. You can use the Top Rim Clamp with a
55-gallon plastic, steel or fiber drum with suitable top rim.
Figure 2.2
Plastic
drum
being
lifted with part number
4560M-P Top Rim Clamp
Assembly installed.
Figure 2.1
Plastic drum being lifted
with part number 4556M-P
Bracket Assembly installed.