The Specialist In Drum Handling Equipment
MODEL 510M
Vertical-Lift, 60”, with Spark Resistant Parts,
Manual Lift & Tilt
Operator’s Manual for Morse Vertical-Lift Drum Pourer Model 510M
Serial Number 242094 to 249854
MorseDrum.com
Copyright 2010 - Morse Mfg. Co., Inc.
Form PL510M (242094-249854) (Updated November 17, 2010 4:08 PM)
2
Safety Information
(continued)
DANGER
- Indicates a situation which, if not avoided,
will
result in serious injury or death.
This signal word is limited to the most extreme situations.
WARNING
- Indicates a situation which, if not avoided,
could
result in serious injury or
death.
CAUTION
- Indicates a situation which, if not avoided, can result in damage to the machine.
CAUTION
-
Do NOT transport with drum raised.
Always lower the drum holder to lowest position before transporting.
DANGER
- Stay well clear of power lines.
Never approach a power line. Current in a high voltage line may arc some distance from the wire to
the steel framed, grounded machine.
WARNING
- The Vertical-Lift Drum Pourer is designed to handle one drum of the types listed at the
top of page 3 - Machine Description. DO NOT attempt to handle any other type of drum or object.
DO NOT exceed the weight capacity of 800 Lb.
WARNING
- Level floors only.
For operation only on clean, level floors of suitable bearing capacity. Do not use on sloped surfaces,
ramps, irregular or debris strewn floors.
WARNING
- Do NOT modify the unit.
Under no circumstances should any modifications be made to the Morse machinery without factory
authorization. Any modifications may void the warranty. This machine was designed to perform a
specific job and alterations may result in injury to operator or machine.
WARNING
- No loose fitting clothing.
Wear close-fitting clothing and safety equipment appropriate to the job. Loose fitting clothing may
become caught on the machinery and cause severe personal injury.
WARNING
- Hydraulic fluid under pressure can be hazardous.
Escaping hydraulic fluid under pressure can penetrate the skin, causing serious injury. Avoid the
hazard by relieving pressure before disconnecting hydraulic lines. Keep hands and body away from
pinholes and nozzles, which eject fluid under high pressure. Use a piece of cardboard to search for
leaks. If an accident occurs, see a doctor immediately and inform them of the nature of the accident.
CAUTION
- Wear safety shoes.
Wear safety shoes with non-slip soles and hard toe protection.