The Specialist In Drum Handling Equipment
Kit # 4804-P
Wireless Remote Control Kit
Installation Instructions for Morse Wireless Remote Control Kit (Part # 4804-P) for field installation on
Model 285A-BP or 285XBP Forklift-Karrier with serial number 0510 to ____ (MMYY), 289F Fork Mounted Drum
Racker or 289C Carriage Mounted Drum Racker
morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc.
Form PL4804
(0510-____)
(Updated 11 Jun, 2019)
4
Install Radio Section
6. Layout receiver and drill (1) 7/8” diameter hole and (2) 1/4” diameter holes per picture.
9. Crimp spade terminal unto black receiver
wire.
10. Attach black wire from receiver to the
same screw as the purple wire on relay.
13. Plug battery to pump. Test unit function
for forward and reverse.
12. For pendant operation, plug male plug
from pendant into female plug of pump.
8. Wire receiver to male plug as follows:
Receiver brown to plug white
•
Receiver white to plug green
•
Receiver green to plug yellow
•
Receiver red to plug brown
•
Receiver black to purple on relay
•
Twist wires and install wire nuts.
7. Strip 3/4” of insulation off the ends of all
the receiver wires and the remaining male
plug.
11. Zip tie all wires neatly to avoid strain.