morse 400A-60-114, Руководство оператора

Страница: 3 / 9

The Specialist In Drum Handling Equipment
Model # 400A-60-114
Hydra-Lift, 60”, Air Power Lift & Tilt
Operator’s Manual for Morse Forklift-Karrier Model 400A-60-114
Serial Number 0103 to 0309 (MMYY)
www.morsedrum.com
Copyright 2009 - Morse Mfg. Co., Inc. Form PL400A-60-114 (0103-0309) (Updated February 27, 2018 2:58 PM)
3
Machine Description
The Model 400A-60-114 Hydra-Lift Karrier will pour a drum up to 60” high, measured from the floor to the lowest point of a horizontal drum.
It is designed to lift, transport, and dispense a ribbed 55-gallon steel drum 22.5” in diameter.
A smaller diameter drum can be handled with the correct size 55/30 Series Diameter Adaptor installed. See Diameter Adaptor •
literature.
A 55-gallon plastic drum can be handled if the unit is equipped with an Adjustable Bracket •
(Option HDPS) or Top Rim Clamp (Option HDRC). See plastic drum option manual.
The maximum full-drum capacity is 800 Lb. The capacity is derated to 500 Lb. for a half-full
drum. The half-full rating is based on the tilt mechanism’s capacity for handling an unbalanced
bottom-heavy drum.
Controls
The Morse Hydra-Lift Karrier is manually propelled and steered.
The hydraulic pump is powered by a vane type air motor. The air
motor is control by a momentary air valve located on the air motor.
Attach air supply to the air valve.
There are two functions for the operator to control (Figure 2.1):
1. LIFT and lower function for vertical positioning of the drum.
To raise the drum, hold the air valve handle in the on •
position and raise the LIFT handle. Release the two valve
handles when desired drum height is reached.
To lower the drum, push in the LOWER handle. Air motor •
is not needed.
2. TILT function to control the degree of rotation of the drum.
To tilt the drum forward for pouring, hold the air valve handle •
in the on position and raise the TILT handle. Release the
two valve handles when drum angle is reached.
To return the drum to vertical position, hold the air valve •
handle in the on position and push down on the TILT
handle.
Figure 2.1