The Specialist In Drum Handling Equipment
Model 185G-HD
Heavy-Duty Kontrol-Karrier
with 3-Piece Drum Holder
Operator’s Manual for Morse Model 185G-HD
Heavy-Duty Kontrol-Karrier with 3-Piece Drum Holder
Serial number 0616 to ____ (MMYY)
Copyright 2021 - Morse Mfg. Co., Inc.
Form PL185G-HD (0616-____)
(Updated 17 Jun, 2021)
3
Machine Description
Model 185G-HD Heavy-Duty
Kontrol-Karrier is designed to lift, transport
and dispense a ribbed 55-gallon (210 liter) steel drum 22.5” (57 cm) in
diameter. The maximum full-drum capacity is 1500 Lb. (680 kg). The capacity
is derated to 800 Lb. (363 kg) for a half-full drum. The half-full drum rating is
based on the tilt mechanism’s capacity for handling an unbalanced, bottom
heavy load.
Options
(shown right)
A 19” (48 cm) diameter ribbed 30-gallon (114 liter) steel drum can be
•
handled with Model 55/30-19GR Diameter Adapter installed.
Counterweight Kit # 4622-P to keep Kontrol-Karrier hanging plumb, even
•
without a drum in holder.
Part # 3900-P
•
MORStop Tilt-Brake Kit for field installation automatically
prevents unwanted drum tilting.
For self-stopping hand crank, install Hand Crank (part # 5U-P) and
•
MORStop Tilt-Brake (kit # 3900-P).
Diameter Adapter
for 19” (48 cm)
diameter drum
Model # 55/30-19GR
Counterweight Kit
Part # 4622-P
Important
Please read all instructions thoroughly before attempting to operate your
1.
new Morse drum handler.
When loading, unloading, operating, or maintaining your MORSE drum
2.
handler, always use care and good judgment. Maintain secure footing
and a firm hold. Keep hands and loose clothing away from all moving
parts. Never allow anyone to be below any part of a raised drum handler
or drum. Read operating instructions and review the pictures in the sales
brochure before operation.
The 185 Heavy-Duty Series are a “Group 1 structural and mechanical”
3.
below-the-hook lifting device which are covered by the American
National Standard ASME B30.20. The user should comply with all
aspects of this standard.
MORStop
TM
Tilt-Brake
Kit # 3900-P
Kit for customer to install
Tilt-Brake on EXISTING
manual tilt drum handler.
Automatically holds
drum tilt angle until you
move it.
Hand Crank or Hand Wheel
Replace standard pull chain to turn drum
16” (40.6 cm)
Hand Crank
Kit # 1460-P
16” (40.6 cm)
diameter
Hand Wheel with
speed knob
Kit # 2690-P
