5
4
CUL
TIV
A
TOR
EDGER
PRUNING SA
W
HEDGE TRIMMER
BRUSHCUTTER
Safety Instructions
1. About This Manual
CAUTION
This manual contains important safety instructions. Before using
this device, read this manual carefully until you are familiar with the
contents. Carefully observe all warnings and safety instructions to
ensure correct operation of the machine. Doing so will ensure safe
operation and optimum performance of the device.
CAUTION
This instruction manual does not cover all possible situations and
conditions. Although we have taken all possible steps to ensure
the safety of this device, the operator and the person performing
maintenance of the device must also take all possible steps to
ensure safety.
2. Recommended Uses
CAUTION
Use this brushcutter only to cut weeds or brush below your knee
height. Do not use it for delimbing, bucking or felling of trees.
3. Safe Practices
CAUTION
Follow local noise regulations regarding the acceptable times and
locations for using this device. Also observe current local safety
regulations, standards, and ordinances.
4. Replacement Parts
WARNING
To maintain optimal safety and performance, use only the
manufacturer’s genuine parts and accessories. Do not modify the
device or use it for purposes other than those specified. Failure to
observe this requirement can result in severe accidents and damage
to the device.
5. Never use a saw blade.
CAUTION
Never attempt to mount a saw blade on this brushcutter; it is not
designed to use a saw blade. The cutting attachment guard, loop
handle or harness for this device does not meet the safety standard
for a saw blade.
6. Operator Safety
WARNING
Do not operate this device if you…
•
cannot concentrate due to fatigue, illness, or injury;
•
are under the influence of drugs or alcohol;
•
are under the age of 15;
•
are pregnant.
If any of the above applies, a possible lack of judgment can result in
an accident.
7. Monitor the weather
WARNING
Do not operate the machine under any of the following
circumstances:
•
When the ground is slippery or you cannot maintain a stable
posture for any reason.
•
At night, in heavy fog, or at any other times where your field
of vision is limited and it is difficult to gain a clear view of the
working area.
•
During rainstorms, thunderstorms, in strong or galeforce winds,
or in any other adverse weather in which use of this device
would be unsafe.
8. Using Safety Gear
WARNING
Always wear proper clothing when using this device.
•
Tight-fitting, safe, and non-restricting clothing including a long-
sleeved shirt and a pair of trousers. (Avoid wearing shorts or
baggy clothing.)
•
Loose-fitting clothing can become entangled in a tree branch
or the like, posing the risk of tripping and resultant injury.
•
Ear protection to protect your hearing
•
Face shield or protective goggles
•
Heavy-duty gloves
•
Non-slip safety shoes (Never operate this device while barefoot
or when wearing sandals.)
•
Head protection to protect your head from thrown objects, etc.
9. Basic Operations
CAUTION
•
To ensure safe operation of this device, become familiar with
the safety instructions and the procedure for shutting off the
engine. (See
Starting and Stopping the Engine
.)
•
In an emergency, it may be necessary to quickly release the
machine from your body; therefore, familiarize yourself with the
correct use of the harness quick release mechanism.
(See
Wearing the Harness • Quick release mechanism
.)
10. Cutting Attachment Guard
WARNING
Never operate the brushcutter without the cutting attachment guard
properly installed. (See
Mounting the cutting attachment guard.
)
The cutting attachment guard protects the operator from thrown
objects and prevents the cutting attachment from contacting the
operator. If the cutting attachment is not properly installed, a thrown
rock can cause death or severe injury.
Names of Parts (with solid blade attached)
1. Engine
2. Spark plug
3. Air cleaner cover
4. Fuel tank cap
5. Muffler
6. Throttle linkage
7. Clutch case
8. Control handle
9. Throttle trigger
10. Throttle trigger lockout
11. Stop switch
12. Suspension point
13. Loop handle
14. Shaft tube
15. Connector
16. Knob
17. Ring Pull
18. Cutting attachment guard
19. Angle transmission
20. Blade
21. Nylon trimmer
22. Skirt
23. Harness
