Morris PROAG 16K PLUS, Руководство оператора

Страница: 70 / 190

Operation
5-32 October 2019 16K PLUS
Automatic Mode
When the Auto screen is displayed, the operator can
perform all the normal functions for loading and stacking
bales. The function of each joystick button is indicated
on the screen.
Some buttons will initiate a sequence of events.
Functions will continue to operate after the user has
released the joystick button.
Note: Crash avoidance is built into the monitor programming to aid operator in avoiding damage. If a function
is selected, by the operator or as part of a sequence, that could potentially harm the machine, the
monitor will disregard the command. See “Trouble Shooting” for more information.
The functions available on the Auto screen are:
Auto Load
• Pressing the Auto Load button will close the alignment arms. Once the arms are closed, the loader will start to
move up. If the button is held for 1.5 seconds, the loader will continue to rise automatically. Pressing the Load
Reset button will stop it.
• If the Bale On Indicator is displayed, the grab hooks will also extend when the loader begins to rise.
• If there are bales in the arms when the loader is fully raised, the power slider will position itself at the foot of the
bales when the loader is all the way up.
• Once the power slider is positioned, the grab hooks will retract.
Load Reset
• Pressing the Load Reset button will open the alignment arms. If there is no bale in the arms, once they are
fully opened the loader will start to move down. If the button is held for 1.5 seconds, the loader will continue to
lower automatically. Pressing the Auto Load button will stop it.
• If the loader has fully raised with a bale, and the power slide is position at the foot of the bale, pressing the Load
Reset button will open the alignment arms. Once the arms are fully open, the power slide will push the bales
down the bed before returning to its home position.
Note: The Power Slide cannot be stopped once it has begun its sequence. In an emergency shut off
power switch on monitor will stop sequence.
• Once the power slider is home, the loader will drop automatically. Pressing the Auto Load button will stop the
loader.
• If the bales will not slide down the bed when the alignment arms are open, it is possible to raise the bed using
the Bed Up button to assist the power slide. In this instance, once the power slide has returned to the home
position, the bed will lower automatically before lowering the loader.
• After the power slide has pushed back the last set of bales, it will remain engaged until the alignment arms
are closed. Once the arms are closed, the slider will return to the home position. In this instance, pressing the
Hitch Inline button once will bring the hitch inline automatically. Also, the loader cannot be lowered using the
Load Reset button until the load is stacked.
Danger
Keep all persons clear of machine while
operating. There are several functions this
machine performs automatically. Unexpected
movements can cause serious injury or death.