manualshive.com logo in svg

Morris PROAG 16K PLUS, Руководство оператора

Поделиться
Скачать
Morris PROAG 16K PLUS Скачать руководство пользователя страница 10

Safety

1-4 

October 2019 

16K PLUS

Lighting and Marking

•  It is the responsibility of the operator to know the lighting and marking requirements of the local highway authorities 

and to install and maintain any additional equipment to provide compliance with the regulations. Aftermarket 
lighting kits are often available from your dealer.

•  This machine is equipped with lighting, marking, and signs in compliance with standards published by the American 

Society of Agricultural Engineers for Slow Moving Agricultural Implements on Public Roadways.

Wheels and Tires

Tire Safety

•  Failure to follow proper procedures when mounting a tire on a wheel or rim can produce an explosion which may 

result in serious injury or death.

•  Do not attempt to mount a tire unless you have the proper equipment and experience.

•  Inflating or servicing tires can be dangerous. Only trained personnel should be called to service and/or mount 

tires.

•  Only install tires and wheels with appropriate capacity to meet or exceed the anticipated weight to be placed on 

the equipment.

DON

’

T FORGET! 

Your best assurance against accidents is a careful and responsible 

operator. If there is any portion 

of this manual or function you do not understand, contact your local authorized dealer or the manufacturer.

Brake Safety

Brakes are Important! 

Brakes are an option on this machine. If your machine is equipped with brakes, please 

observe the following guidelines regarding operation, maintenance, and adjustment.
•  Follow all connection procedures under “Hooking Up for the First Time” in Section 5 of this manual.  For the brakes 

to operate properly, they must be connected properly.

•  Be sure all the brakes are adjusted properly, following the procedures outlined under “Air Brake Maintenance” in 

Section 6 of this manual. If the brakes are not adjusted properly, they will not operate properly.

•  Use caution whenever operating this machine. Even though brakes are available for use, this machine can still 

be driven too quickly for the conditions. Always allow plenty of time to slow down for emergency situations.

•  Test the brakes before operation.
•  Applying the brakes to lockup will cause the stacker to slide and behave erratically. Avoid this situation.

Содержание PROAG 16K PLUS































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды