16
5.3.1 EMPTYING THE WATER TANK
The water tank built in unit will fill up and shut the unit down once it is full. It
will run again once you empty the water tank and installed properly.
●
When the tank is full, The unit will make a buzzing sound, and the
“Water Full” light will turn on.
●
Press the POWER button to turn off the unit.
●
Pull on the water tank and simply slide out of the body of the
dehumidifier.
●
Empty the water into an area with a drain or outside.
●
Clean the inside of the tank as well as the outside.
●
Replace the empty tank back into the unit.
●
Press the POWER
button to resume operating.
●
If the Water Full light does not extinguish, check that the float is correctly in
place.
5.3.2 CONTINUOUS DRAINING
For continuous operation or unattended dehumidification, please connect the
attached drain hose to the unit. Condensate water can be automatically flow
into a bucket or drain by gravity.
●
Set the unit in a horizontal surface and stable position.
●
Switch off the unit before operating.
Remove the plug of the water outlet opening, and keep it in safe area.
