background image

► Do not operate this device if its power cable or plug is damaged, if it does not work 

properly or if it is damaged or has been dropped. If the power cable is damaged, it will 
need to be replaced by the manufacturer or his service agency or a similar qualified 
person, to avoid any dangers. 

► Do not open the housing on the device under any circumstances. There is a danger of an 

electrical shock if live connections are touched and the electrical or mechanical structure 
is altered. In addition, functional faults on the device can also occur. 

► Do not touch the appliance or the mains plug with wet hands. 

► Do not immerse the appliance in water or other liquids, and do not put it in the 

dishwasher. 

► Do not insert objects into the openings of the appliance. There is a risk of electrocution if 

contact is made with voltage-carrying connections.  

► Do not connect the device to the same outlet with other devices. 

 

3.

  Commissioning 

This chapter provides you with important safety notices during the initial commissioning of 
the device. Observe the following notices to avoid dangers and damages: 

3

.1  Safety information 

Personal and property damages can occur during commissioning of the device! 

Observe the following safety notices to avoid such dangers: 

► Packaging materials may not be used for playing. There is a danger of suffocation. 

3

.2  Delivery scope and transport inspection 

MORRIS MIP65400

 is delivered with the following components: 

  Single Induction cooker 

MIP65400

  Operating Instructions 

► Examine the shipment for its completeness and for any visible damages. 

► Immediately notify the supplier about any incomplete shipment or damages as a 

result of inadequate packaging or due to transportation. 

3

.3  Unpacking 

To unpack the device, remove the device out  of the carton and remove the packaging 
material. 

 

Содержание MIP-65400



















Отзывы: