Morris 57266, Инструкция по эксплуатации

Страница: 13 / 23

3.
4.
Connect the test lead tips in parallel with the circuit
to be measured. Be careful not to touch any
electrical conductors.
Read the measure result directly from the display.
AC CURRENT MEASUREMENT
1.
2.
3.
Set the rotary switch at A~ position.
Clamp one conductor in Transformer jaws, making
sure that the jaw is around the conductor.
Read the measure result directly from the display.
RESISTANCE MEASUREMENT
1.
2.
3.
4.
5.
Insert the black and red test leads into the COM
and V
Ω
Hz input terminals respectively.
Set rotary switch at desired
Ω
position.
Push F.FUNC. button to select
Ω
.
If the resistance being measured exceeds the
maximum value of the range selected or the input
is not connected, an overrange indication “OL” will
be display and the higher range has to be selected.
Read the measure result directly from the display.
-11-