4
Chapter 1 Product Introduction
Congratulations on your purchase of the PoE Web Smart Ethernet Switch. Before you
install and use this product, please read this manual carefully for a full understanding of its
functions.
1.1 Product Overview
The 8-port + 2SFP 10/100/1000M PoE Web Smart Ethernet Switch provides seamless
network connection. It integrates 10/100/1000Mbps Ethernet network capabilities in a
highly flexible package. These PoE ports can automatically detect and supply power with
those IEEE 802.3at compliant Powered Devices (PDs). In this situation, the electrical
power is transmitted along with data in one single cable allowing you to expand your
network where there are no power lines or outlets, where you wish to fix devices such as
APs, IP Cameras and IP Phones, etc.
The Web Smart Ethernet Switch, and can be configured by web based interface. Including
administrator, port management, VLAN setting, each port statistics, trunking setting, QoS
setting, security filter, configuration/backup/recovery, log out, and so on.
1.2 Features
Complies with IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3z.
IEEE802.1q, IEEE802.1p standards.
8x10/100/1000Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX.
Supports PoE power up to 30W for each PoE port.
Supports All power up to 140W.
Support the Console port management.
Supports PoE IEEE802.3at compliant PDs.
Supports IEEE802.3x flow control for the Full-duplex Mode and backpressure for the
Half-duplex Mode.
8K entry MAC address table of the Switch with auto-learning and auto-aging.
Supports WEB management interface.
LED indicators for monitoring power, link, activity and speed.
Internal power adapter supply.
1.3 External Component Description
1.3.1 Front Panel
The front panel of the Switch consists of 8 x 10/100/1000Mbps RJ-45 ports, 1 x Console
port, 2 x SFP ports, 1 x Reset button and a series of LED indicators as shown as below.
