25
4.3.3 Hybrid-port setting
In the navigation bar to select “
VLAN config>Hybrid-port setting
”, Can set the port to
take the tag and without the tag, the following picture:
【
Instructions
】
Hybrid port to packet:
Receives a packet, judge whether there is a VLAN information: if there is no play in port
PVID, exchanged and forwarding, if have, whether the Hybrid port allows the VLAN data
into: if can be forwarded, or discarded (untag on port configuration is not considered,
untag configuration only work when to send it a message).
Hybrid port to send packet:
1. Determine the VLAN in this port attributes (disp interface can see the port to which
VLAN untag, which VLAN tag).
2. If it is untag stripping VLAN information, send again, if the tag is sent directly.
【
Configuration example
】
Such as: create VLAN 10, VLAN 20, set port 1 Native VLAN as 10, tagged VLAN as 10,
20, sets the Native VLAN port 2 as 20, tagged VLAN as 10, 20.
