7
edge range
wall bay kit 3
assembly guide
6
attach shelves
Lastly, screw in the shelves with self-tapping screws (not supplied - we
suggest ø4x30mm 18mm thick).
4
attach to the wall
Screw the wall plates to the wall (screws and wall plugs not supplied) and
then fix the uprights and shelf supports to the wall plates with screws
M5x10 TB. Now tighten all screws and those of the joints.
2
insert the connectors
Insert end connectors (9652) and centre connectors (9651) in square
holes of uprights. End connector is a single model for right and left, pay
particular attention to direction of the thread.
1
place the base
Place the wooden bases (9625D) close to the wall, insert the square
collars (9615) and the uprights (9600 with black finned cap)
3
insert wall plates and mark
Insert the wall plates (9612) in the uprights, place against the wall, ensure
they are level and mark references. The bases remain detached from the
wall to allow mounting with baseboards or skirting.
2
attach the hanging rails
Insert the 5 hanging rails (9653A) between the uprights.. Fasten with
screws M5x10 TB -
not tight
.
