5
edge range
wall bay kit 2
assembly guide
6
attach shelf
Screw in the shelf with self-tapping screws (not supplied - we suggest
ø4x30mm 18mm thick).
5
attach to the wall
Screw the wall plates to the wall (screws and wall plugs not supplied) and
then fix the uprights to the wall plates with screws M5x10 TB. Now tighten
all screws and those of the joints.
4
insert wall plates and mark
Insert the wall plates (9612) in the uprights, place against the wall, ensure
they are level and mark references. The wooden base remains detached
from the wall to allow mounting with baseboards or skirting.
3
attach the hanging rails
Insert the hanging rail (9653B) between the uprights. Fasten with screws
M5x10 TB -
not tight
.
2
insert the connectors
Insert end connectors (9652) in square holes of uprights. End connector
is a single model for right and left, pay particular attention to direction of
the thread.
1
place the base
Place the wooden base (9625D) close to the wall, insert the square
collars (9615) and the uprights (9600 with black finned cap)
