7
This function is ideal for cleaning vertical
surfaces and hard to reach places.
Separate the handheld steam cleaner
(9)
from
the main body
(7)
by sliding the handheld
release button
(6)
upwards on the front of the
main body.
Pull the handheld steam cleaner up and out of
the main body.
In order to use all of the accessories, the
accessory adaptor
(24)
must firstly be attached
onto the handheld steam cleaner
(9)
. This can be
done by completing the following:
A
Slide the adaptor over the nozzle of the steam
cleaner with the release catch on the adaptor
facing the base of the handheld steam cleaner.
Align the keyway on the handheld steam cleaner
with the release catch on the adaptor. Push
together and fix into place.
B
Attach the desired accessory to the end of the
adaptor by aligning the arrow on the accessory
with the right-hand arrow on the adaptor and
twist the accessory until the arrow aligns with the
left arrow of the two on the adaptor.
NOTE: handheld mode has been designed for
one-handed use.
Warning
WARNING: Switch OFF and unplug before
changing nozzles. After use, nozzles will be
very hot, allow to cool before handling.
WARNING: When using in the handheld mode,
only ever hold the product by the handheld
handle
(8)
.
The underside of the handheld steam cleaner
(9)
will become warm during use - this is normal.
Never place the product on delicate surfaces that
could be affected by heat.
Never block any nozzle, eg. by holding against a
surface being cleaned. If the nozzles are blocked,
steam will be released from the steam relief vent
(16)
.
A
B
B
24
24
Using in upright steam cleaning mode (continued)
5
Place the floorhead
(20)
on the floor. Hold the
floorhead to the floor with your foot and tilt the
main body
(7)
back.
To emit steam continually, press and hold the
steam trigger
(2)
whilst slowly pushing the cleaner
back and forth along the floor.
But to prevent
over-wetting of the floor, operate the steam
trigger intermittently (especially on hard floors).
6
If cleaning carpet, push and clip the floorhead
(20)
with the micro-fibre carpet cloth
(22)
attached into the carpet glider
(21)
.
NOTE: The carpet glider is designed to make it
easier to move the floorhead across the carpet.
Using the handheld steam cleaner
VC720024MUK Rev1.qxp_Instruction Booklet 12/08/2014 10:20 Page 7
