6
Using in upright steam cleaning mode
2
Attach the desired micro-fibre floor cloth
(22/23)
to the floorhead
(20)
, with the blue side of the
cloth facing the floor.
Squeeze the buttons
(14)
on the side of the water
tank
(15)
to remove it from the handheld steam
cleaner
(9)
.
Remove the filler cap
(12)
by rotating it
anti-clockwise to the ‘unlock’ position, then lift it
out.
Fill the water tank.
IMPORTANT: To prevent limescale build-up in the
water tank, never fill your steam cleaner’s tank
with anything other than deionised, demineralised
or distilled water (available from most leading
supermarkets). Any problems arising from
limescale will invalidate the product guarantee.
Replace the filler cap and turn it clockwise to the
‘lock’ position.
Replace the water tank.
Rotate the upper cord storage hook
(4)
to
quickly release the power cord
(11)
.
Secure the power cord in the cord holder
(3)
.
4
WARNING: Before switching ON, ensure the
floorhead is located safely away from persons
or animals.
Plug in at the mains outlet and switch on your
steam cleaner at the On/Off power switch
(13)
.
The power indicator light
(17)
will illuminate and
steam will be ready to be emitted after around 30
seconds (when the steam trigger
(2)
is pressed).
1
3
IMPORTANT: Before use, hardfloors should be thoroughly swept and carpets should be thoroughly dry
vacuumed. However, we recommend that your steam cleaner is not used on:
•
bare wooden floors or any surfaces where wood is exposed (as it will absorb moisture and may distort).
•
damaged hardfloors or hardfloors with gaps present (as it will absorb moisture and may distort).
Also, do not keep your steam cleaner in one place for an extended period, because the continual heat
may cause damage to carpets and laminate flooring.
Please disconnect and allow the unit to cool before changing cloths and attachments.
VC720024MUK Rev1.qxp_Instruction Booklet 12/08/2014 10:20 Page 6
