Standard
accessories
Application
Curtains and delicate
fabrics
Textiles and upholstery
Shelves and
hard surfaces
Carpets and
other textile
floor coverings
(brushes up)
Heavy dirt and
smooth floors
(brushes down)
Deep pile carpets
(especially for hair and fibre
pick-up)
4
OPERATING THE
APPLIANCE
TOOLS AND
ACCESSORIES
Combinaton floor
nozzle
This nozzle
È
is suitable for
general purpose cleaning on a
wide variety of floor coverings.
Using & cleaning the
turbo nozzle
(certain models only)
The Turbo nozzle
Ó
is ideal for
hair and fibre pick-up, especially
on deeper pile carpets.
After use, hair and fibres may
become wrapped around the
brush, reducing the
performance. To remove,
carefully cut the hair and fibres
with scissors before pulling
away. If any large particles are
sucked into the turbo nozzle,
these may become caught in
the turbo fan. To access the
turbo fan, remove the cover
from underneath the nozzle.
Make certain the cover is
re-fitted before re-using the
turbo nozzle.
Tool storage
A
The upholstery nozzle and the
crevice tool are stored in the
internal storage compartment
›
.
OPERATION
Assembly
B
&
C
Snap the 360° rotating head on
the suction hose
Ë
into the
suction hose opening
¤
on the
vacuum cleaner.
Fit the telescopic tube
Í
to the
hose handle. Press the release
button to adjust the length of
the telescopic tube.
Attach the desired nozzle to the
bottom of the telescopic tube.
Alternatively, the nozzle can be
attached directly to the hose
handle.
Switching on
D
Pull out the mains supply cable
to it’s maximum length. Plug the
appliance into the mains supply.
Push the on/off foot switch
‰
to start the motor.
A
D
UK Helpline 0844 871 0949
Replacement Parts 0844 873 0715
Ireland Helpline 1800 409 119
B
C
È
È
Ó
Ô
Ô
Ô
70069 rev1:VC70069 MUK Rev1 05/10/2009 09:55 Page 4