8
This function is ideal for cleaning vertical
surfaces and hard to reach places.
Separate the handheld steam cleaner
(9)
from
the main body
(7)
by sliding the handheld release
button
(6)
upwards on the front of the main body.
Pull the handheld steam cleaner up and out of
the main body.
Adjust the variable steam control as required.
For upholstery and window cleaning, use
minimum steam. For the brushes and scraper,
use maximum steam.
Operate the trigger under the handle to release
the steam.
NOTE: If the trigger is continually held, the
steam output will cycle higher and lower, this is
normal.
CAUTION: After using the handheld steam
cleaner, return the unit to the main body. The
body of the handheld steam cleaner becomes
warm in use, so should not be left on any
delicate surfaces.
In order to use all of the accessories, the
accessory adaptor
(27)
must firstly be
attached onto the handheld steam cleaner
(9)
. This can be done by completing the
following:
A
Slide the adaptor over the nozzle of the
steam cleaner with the release catch on the
adaptor facing the base of the handheld
steam cleaner.
Align the keyway on the handheld steam
cleaner with the release catch on the adaptor.
Push together and fix into place.
B
Attach the desired accessory to the end of
the adaptor by aligning the arrow on the
accessory with the right-hand arrow on the
adaptor and twist the accessory until the
arrow aligns with the left arrow of the two on
the adaptor.
NOTE: handheld mode has been designed
for one-handed use only.
Warning
WARNING: Switch OFF and unplug before
changing attachments. After use,
attachments will be very hot, allow to cool
before handling.
WARNING: Steam can be emitted from the
steam relief vents
(18)
on the rear of the
product. Always keep this area clear of
people, animals or delicate surfaces. Do not
hold the product in this area. When using in
the handheld mode, only ever hold the
product by the handheld handle
(8)
.
Never block any nozzle eg by holding against
a surface being cleaned. If the nozzles are
blocked, steam will be released from the
steam relief vents.
Limescale build-up inside the boiler could
also result in steam being emitted from the
steam relief vents. Only ever use
demineralised, deionised or distilled water to
prevent limescale forming.
Using the handheld steam cleaner
A
B
B
27
27
VC720502MUK Rev2_Instruction Book 07/06/2013 15:41 Page 8
