7
To operate, ensure that there is
little water in the tank, place the
iron on its heel and turn the
temperature control dial to the
maximum setting. Wait for the
beep, then unplug the iron and
hold it about 6’’ (150mm) above
the sink in the ironing position.
Press the shot of steam button
about 10 times in succession.
After this cleaning operation,
empty out any remaining water.
WARNING: Do not attempt to
descale the soleplate with
descaling products.
To clean a stainless
steel soleplate
To keep the soleplate of your
iron clean and free of limescale,
we recommend that you use
one of the gentle chrome, silver
or stainless steel cleaners that
are generally available. Always
follow the manufacturers
instructions. To clean off melted
man-made fibres set the iron at
3 dot position and pass it over a
clean piece of cotton which will
draw the deposit off the surface.
To clean a coated
soleplate
(certain models)
In the unlikely event of any
man-made fibre fusing to the
soleplate, set the iron at the 3
dot position and pass it over a
clean piece of cotton which will
draw the deposit off the surface.
Do not use scouring powder or
solution as this could cause
damage to the coating.
To clean the exterior
Allow the iron to cool and wipe
over with a damp cloth and mild
detergent, then wipe with a dry
cloth.
Emptying and storing
When you have finished ironing,
unplug your iron. Ensure that the
variable steam control is set at
the ‘0’ position, lift up the fill cap
and empty any remaining water
out of the filling hole. Do not
store in the box, but in an
upright position, so that any
drops of water remaining cannot
leak out and discolour the
soleplate
G
.
Important: The flex can be
damaged if wound too tightly
around the iron after use. Make
a loose loop with the flex and
wrap it around the iron. The iron
must be cool before winding the
flex and storing on its heel
H
.
Helpline
If you have any difficulty with
your appliance, do not hesitate
to call us.
We are more likely to be able to
help than the store from where
you bought it.
Please have the following
information ready to enable our
staff to deal with your query
quickly.
•
Name of the product.
•
Model number as shown on the
underside of the appliance.
•
Serial number as shown on
underside of the appliance.
UK Helpline
0844 871 0953
Replacement Parts 0844 873 0719
Ireland Helpline 1800 409 119
WEBSITE
You may also contact us
through our website, or visit the
site to browse and purchase
appliances, spare parts and
accessories from the extensive
Morphy Richards range.
G
H
For details of other Morphy Richards products, please see our website:
RN40715 MUK Rev5:RN40715 MUK Rev5 13/05/2009 16:14 Page 7
