6
7
To Reduce the Risk of Injury to Persons Grounding Installation
DANGER
WARNING
ELECTRIC SHOCK HAZARD
Touching some of the internal components can cause serious personal injury
or death. Do not disassemble this appliance.
It is hazardous for anyone other than an authorised repairer/technician to carry
out any service or repair operation that involves the removal of a cover which
gives protection against exposure to microwave energy.
See the instructions on “Materials you can use in microwave oven or to be
avoided in microwave oven.” There may be certain non-metallic utensil/
container that are not safe to use for microwaving. If in doubt, you can test the
utensil/container in question following the procedure below.
ELECTRIC SHOCK HAZARD
Improper use of the grounding can result in electric shock.
Do not plug into an outlet until appliance is properly installed and grounded.
This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for
the electric current.
This appliance is equipped with a cord having a grounding wire with a
grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded.
Consult a qualified electrician or serviceman if the grounding instructions are
not completely understood or if doubt exists as to whether the appliance is
properly grounded.
CLEANING
UTENSILS CAUTION
UTENSILS TEST
BE SURE TO UNPLUG THE APPLIANCE FROM THE POWER SUPPLY.
1.
Clean the cavity of the oven after using with a slightly damp cloth.
2.
Clean the accessories in the usual way in soapy water.
3.
The door frame and seal and neighbouring parts must be cleaned carefully
with a damp cloth when they are dirty.
4.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
oven door glass since they can scratch the surface, which may result in
shattering of the glass.
5.
Cleaning Tip: For easier cleaning of the cavity walls that the food cooked
can touch: Place half a lemon in a bowl, add 300ml (1/2 pint) water and
heat on 100% microwave power for 10 minutes. Wipe the oven clean using
a soft, dry cloth.
1.
Fill a microwave-safe container with 1 cup of cold water (250ml) along with
the utensil/container in question.
2.
Cook on maximum power for 1 minute.
3.
Carefully feel the utensil. If the empty utensil/container is warm, do not use
it for microwave cooking.
4.
Do not exceed 1 minute cooking time.
