Morphy Richards MOMENTO 47815, Инструкция по технике безопасности

Страница: 8 / 33

9 INSTALLATION
If you find coffee grounds, it is because the coffee-maker has
been tested to make sure it works perfectly.
Before switching on the coffee-maker, make sure you have
removed the protection from the screen.
1. Fill the coffee bean tank with coffee beans (the tank has a
capacity for up to 250 g).
2. Fill the water tank with clean, cool water. You can fill it
directly (a) or under the tap (b)
a) Lift the water b) Remove the tank by
tank cover. the handle.
When placing the tank back in position, make sure it fits into
the flap on the body, so that it is perfectly in place.
3. Connect the power cable.
4. Turn on the on/off switch at the rear of the coffee-maker.
Turn it to the “I” position to switch the coffee-maker on.
5. The standby button will come on (blue).
6. The first time you use the coffee-maker, its internal
circuits need to be filled with water. The steam jet/hot
water regulator icon appears on the LCD screen to
indicate that the circuit needs to be filled.
IMPORTANT! Perform this operation BEFORE any other.
IMPORTANT! The circuit must be filled each time the steam
regulator icon appears on the display. This icon appears each
time the machine is PLUGGED IN.
7. Place a compartment (glass or jug) under the steam
nozzle.
8. To fill the circuits with water, turn the steam regulator
anticlockwise as far as it will go.
9. Wait until water or steam comes out of the steam
nozzle.
10. Close the steam regulator to complete the circuit filling
process.
11. Remove the compartment with the hot water.
12. The coffee-maker will turn off and is ready for use. Press
the standby button.
13. An hourglass will appear on the display to indicate that
the system is heating up.
14. The coffee-maker auto-cleans the pipes to remove
possible remains of coffee or water. During this process,
water comes out of the coffee outlet. This ensures that
you enjoy a coffee made with clean, fresh water.
8