8
1
The Mixstar Mixer ships with the Whisks
(7)
already attached to the Twin Assembly. It can be disassembled
for cleaning. The Beaters
(8)
may be used in place of the Whisks. To remove the Whisks or Beaters lay the
Twin Assembly Spindles
(5)
on a flat surface, hold this firmly whilst pulling the Whisks
(7)
or Beaters
(8)
from the Spindles, these attachments are a tight fit. To replace, press each attachment onto the Spindles
until you hear/feel a click. Securely fitting these attachments is important for correct performance.
Twin Assembly Setup
2
Switching attachments
1
2
3
Assembly
4
1
2
Disassembly
FP400520 MUK Rev1.qxp_Layout 1 14/05/2020 16:45 Page 8
