4
M
Miin
nii jju
ug
g m
mo
od
de
ells
s
The mini jug can be used on voltages between
110V and 240V AC only. Ensure the correct plug
adaptor is used when operating in a country not
using the UK 13 amp socket system. If in doubt
consult a competent electrician.
Note:
If using the jug on a 110 volt supply,
the water will take considerably longer to boil.
M
Mo
od
de
ells
s w
wiitth
h
d
de
es
sc
ca
alle
e n
ne
eo
on
n
These models are fitted with 2 indicator neons
for your benefit.
Red neon: This indicates when the element is
energised. When the water boils and the element
switches off, the neon will go out.
Orange neon: This indicates that either the
kettle is in need of descaling or that the kettle
has been switched on without water in.
If the orange neon comes on due to scale
build-up on the element (this will happen
frequently if you live in a hard water area) follow
the descaling instructions in this leaflet.
If the orange neon comes on due to lack of
water in the kettle, wait a few minutes for the
kettle to cool, refill with cold water and use as
normal.
G
Ge
en
ne
erra
all c
clle
ea
an
niin
ng
g
In order to maintain the pouring and boiling
performance of your kettle, it is important to
clean and wash out the interior of the kettle
regularly, particularly in hard water areas. This
also applies to the filter, if fitted. Please also refer
to section on Descaling.
To flush scale deposits from the interior of
the kettle, fill with cold water through the spout
and empty out through the spout with filter
removed. The interior may also be wiped
carefully using a soft clean damp cloth.
Wipe the outside of the kettle with a soft
damp cloth only, avoiding electrical connections.
F
Fiilltte
err rre
em
mo
ov
va
all a
an
nd
d
c
clle
ea
an
niin
ng
g
((c
ce
errtta
aiin
n m
mo
od
de
ells
s o
on
nlly
y))
WARNING: ALLOW KETTLE TO
COOL COMPLETELY BEFORE
REMOVING FILTER.
F
Fiilltte
err JJu
ug
g K
Ke
ettttlle
es
s
To remove the filter, open the lid and lift the
filter vertically from its location using the tab
provided.
To refit the filter, position between the 2 side
wall guides and press down firmly. Ensure the
filter is correctly located into the central guide.
NOTE: UNLESS THE FILTER IS FITTED
CORRECTLY, THE KETTLE LID MAY NOT
CLOSE AND LOCK SECURELY.
F
Fiilltte
errm
ma
as
stte
err T
Trra
ad
diittiio
on
na
all K
Ke
ettttlle
e
To remove filter, pull top of filter forwards
from under handle front and lift.
Refit the filter by pushing down firmly into
spout until the filter latches into position under
handle front.
C
Clle
ea
an
niin
ng
g tth
he
e ffiilltte
err
Once removed from the kettle, clean the filter
by brushing gently with a small soft brush under
water. Any hard deposits of scale may be
removed by de-scaling. Do not use a sharp object
which may damage the filter mesh.
Red ‘on’ neon
Orange
‘descale’ neon
R
Re
em
mo
ov
viin
ng
g
ffiilltte
err
7271 UK kettles ib Rev 2 Mex 15/05/2003 13:39 Page 6
