5
2 position wheeled floor nozzle
Ê
The brushes should be retracted for use
on carpets and down for use on hard floors
by adjusting the lever on the floor nozzle.
After vacuuming
1
Switch off the vacuum cleaner.
2
Unplug from the mains.
3
Use a hand or foot to operate the cable
rewind
fi.
WARNING: When using the cable
rewind, always hold the plug as the
cable will rewind quickly.
Emptying the pod
1
Disconnect the cleaner from the mains
socket.
2
Disconnect the hose from the hose inlet
duct.
3
Remove the pod by pushing the pod
release latch.
D
4
Remove the filter basket and empty the
pod into a waste bin.
E
If the dust is tightly packed tap the front
cover. Shake the filter basket into the waste
bin, this will remove most of the dust.
Replacement filter
basket
To maintain the suction of the cleaner
the filter basket must be washed regularly
(in warm water only, no detergent).
1
Allow the filter basket to air dry naturally.
IMPORTANT: Both parts MUST BE
THOROUGHLY DRY before the assembly is
re-fitted to the cleaner. An additional
replacement filter basket is included so that
the vacuum cleaner can continue to be
used while the other filter basket is being
washed and dried.
D
E
73190 Rev 1 28/4/04 6:23 PM Page 5
