Steam cleaner
Please read and keep these instructions
Quick start
1
Fill the tank up to a maximum of 1.0 litre of water
(using warm water will reduce the heat-up time).
Screw cap on and tighten fully.
2
Attach the hose and required accessories.
3
Connect to the power supply.
4
Press the on/off button to start heat-up. When
orange light turns off, the steam is ready.
5
Press the trigger on the handle to release the
steam.
6
Aim the steam safely: at the start water may be
ejected. Hold over a sink or bucket until excess
water has cleared.
Descaling
Descale regularly, do not wait for a problem to
occur. In very hard water areas we recommend using
distilled water.
www.morphyrichards.com