Control panel
Switching on
• When the machine is switched on the
display will flash.
• To set the time press the HOUR button.
It is a 12 hour clock.
• Then press the MINUTE button.
To brew at a pre-set time
• Press the PROGRAM button.
Note: If no buttons are pressed, the
display will revert to the time display
within 10 seconds.
• Press the HOUR button.
• Then press the MINUTE button to set the
desired start time.
To set to brew at a pre-set time
• Press the AUTO button (green light
glows).
Note: Press the AUTO button again to
cancel pre-set brewing.
To brew manually
• Press the ON/OFF button (red light
glows).
Note: Press the ON/OFF button again to
cancel brewing.
5
Red light
Green light
47070 Rev 1 24/3/05 2:23 PM Page 5