background image

Emptying and storing

When you have finished ironing, unplug

your steam station. Ensure that the steam
control is set to the 'OFF' position.

Do not store in the box, place the iron

onto the steam station base and allow to
cool before storage.

Maintenance

WARNING: Do not attempt to descale

the steam station with descaling
products.

To clean a stainless steel soleplate

To keep the soleplate of your steam

station clean and free of limescale, we
recommend that you use one of the gentle
chrome, silver or stainless steel cleaners that
are generally available. Always follow the
manufacturers instructions. To clean off
melted man-made fibres set the steam
station at 3 dot position and pass it over a
clean piece of cotton which will draw the
deposit off the surface.

To clean the exterior

Allow the steam station to cool and wipe

the iron and base unit with a damp cloth and
mild detergent, then wipe with a dry cloth.

Helpline

If you have any difficulty with your 

appliance, do not hesitate to call us.

We are more likely able to help than the 

store from where you bought it.

Please have the following information 

ready to enable our staff to deal with your 
query quickly.
• Name of the product
• Model number as shown on the underside

of the appliance.

6

42345 Rev 2  31/5/05  9:39 AM  Page 6

Содержание IB42345









Отзывы: