5
5
www.morphyrichards.com
•
If additional length is required,
attach one or both extension
tubes.
6
Switch on/off.
•
IMPORTANT: Always fix the
hose clip
˜
to the main body
slot
Ë
when using the hose and
tools.
•
Never over extend the hose
such that the cleaner is pulled
over.
IMPORTANT: Turning the cleaner
sideways helps prevent the
cleaner being pulled along by
the stretch hose.
Using & cleaning
turbo nozzle
(Certain models only)
Attach the turbo nozzle to the
hose end connector Í for use on
upholstery and stairs.
After use your turbo nozzle may
become clogged. Turn over the
nozzle and pull away any hairs
or fibres. If they are tightly
wound around the brush
carefully snip the fibres with
scissors, being careful not to
damage the brush bar, pull away
from the brush bar and dispose.
EMPTYING
Empty the dust canister
regularly even if it does not look
full this will maintain the
performance.
1
Remove the front cover by lifting
the cover release lever
¤ E
.
2
Lift-up the dust canister release
Î
and pull the canister away
from the main body.
3
Take the canister to the dustbin.
4
Turn the lid 1/4 turn anti-
clockwise to unlock, lift off the
lid with pleated filter,
Ì
put to
one side.
F
5
Lift out the central mesh filter
Ô
from the dust canister
Ó G.
Brush clean if necessary.
6
Empty out the dust canister
Ó
.
7
Re-fit the central mesh filter.
8
Shake the pleated filter to remove
all dust.
9
Re-fit pleated filter with lid into
the dust canister by lining up the
two arrows and turning the lid
1/4 turn clockwise to lock.
10
Re-fit dust canister into cleaner
and push to lock into position.
Then re-fit front cover.
D
E
F
73360 rev4 11/7/06 14:43 Page 5
