l
l
l
l
Place the tong rods below the rotisserie rod
socket and wait for the OTG to cool.
notches, provided at the extreme ends. Lift
2. Wipe the glass door and the inner cavity of
up the left end of the rotisserie rod slightly.
the OTG with a moistened cloth. Wipe
Push the rotisserie rod towards left so that it
again with a dry cloth.
comes out of the socket.
3. If any food particle or liquid has spilled,
Now lift the right end of the rotisserie rod.
clean it with a damp cloth and let the
interior dry thoroughly.
Balance the tong with both hands along
with the food item and rotisserie rod while
4. Never use metal polish or coarse scouring
removing out the same.
agents for cleaning.
NOTE:
The recipes given in the recipe section
5. Do not scrub the surface of the cooking
are meant as a guideline. The timings and
tray with any hard or abrasive material,
temperatures given with the recipes may vary
while cleaning. Use a sponge or nylon
to a certain extent depending on voltage
scrubber to clean the surface of the
variations, ingredients used and ambient
cooking tray. To clean the stubborn food
conditions.
particles on the cooking tray, make a thick
paste of normal washing powder using
Kebab Rod :
little water and apply on the surface. Keep it
The Kebab Rod with multiple spokes helps in
for a while, scrub with sponge and wash.
roasting food as it revolves over the source of
6. Removable wire rack, baking tray, crumb
heating. The rotating device cooks the food
tray can be washed, as normal
evenly & makes it more tender & juicier.
kitchenware.
How to use the “Kebab Rod”:
Disposal:
Insert the food onto the spokes of the
Old appliances must be put out of
kebab rod.
order. About the latest ways for
disposal, contact your retailer or
Insert ‘A’ end of kebab rod into rotisserie
local authority.
rod support and insert ‘B’ end of kebab rod
into the rotisserie rod socket.
Repairs:
Electrical appliances must only be repaired by
Shut the door.
authorized specialists. Because damages can
occur by non-authorized repairs, in the case of
Set the temperature, timer & function knob
a repair, contact Morphy Richards service
as per the requirement of the recipe.
center.
General cleaning and care:
1. After use and before cleaning, switch-off
the OTG, remove the power plug from the
Technical Data:
Power Supply
: 230V, AC 50Hz
Wattage
: 2000W
6
