7
UK Helpline 0870 060 2614
Replacement Parts 0870 157 6645
Ireland Helpline 1800 409119
For details of other Morphy Richards products, please see our website:
•
Ensure the jug
·
lid is fully
closed by turning the lid
clockwise, this ensures the
maximum temperature is
maintained in the jug. To
ensure the coffee is kept as
warm as possible, we advise
you rinse your thermal carafe
in hot water before use.
•
Please note the jug lid must
be in place during the
brewing process; otherwise
the non-drip valve will not
open, causing the filter to
flood.
6
Select the required strength
of coffee using the strength
selector on the lid
L
.
7
Press the power ON/OFF
selection button
Û
. The
display lights up brightly and
the cup selection indicator
will flash showing the
previous selection.
NOTE: If the machine has
been unplugged from the wall
socket since the last
operation, the previous
selection will be cleared, the
default setting will be applied
(1 full carafe).
8
Press the cup selection
button
¯
to select one of the
available options,
1/2
carafe
or full carafe
M
depending
on the number of cups
required. Refer to ‘Cup
selection function’ on page
11 for further information. The
selection indicator will stop
flashing, if no buttons are
pressed for 2 seconds, the
machine will begin the
brewing process.
9
The brewing indicator
˘
will
start to illuminate from left to
right, indicating that brewing
is in progress, hot water will
start to flow through the
coffee grounds and into the
jug as coffee
·
.
Glass Carafe Variant
When the brewing process is
complete, the product will
automatically switch to keep
warm
; the brewing
indicator
˘
will stop
illuminating from left to right.
All segments will remain
solidly illuminated, indicating
the machine is in keep warm
state. The indicator has now
changed from a brewing
indicator to a quality
indicator. Refer to ‘Coffee
Quality indicator’ on page 11
for further information.
The automatic keep warm
function will keep the coffee
warm in the carafe until the
product is switched off.
For safety reasons, the coffee
maker will automatically
switch off after two hours.
The anti-drip valve
È
will
prevent any remaining coffee
dripping onto the hot plate
during serving. Ensure that
the jug is replaced on the hot
plate after serving.
We suggest consuming your
coffee within two hours, after
this time we suggest brewing
another jug of fresh coffee.
WARNING: The coffee
maker and hot plates are
hot and remain hot for
some time after switching
off.
NOTE:
•
Remember to turn off the
machine when you have
finished.
•
Allow the unit to cool.
•
Remove the permanent filter
and empty the used coffee
grounds. Wash the filter
immediately and dry
thoroughly.
Thermal Carafe Variant
When the brewing process is
complete, the product
remains on, the brewing
indicator
˘
will stop
illuminating from left to right,
all segments will remain
solidly illuminated, the
indicator has now changed
from a brewing indicator to a
quality indicator. Refer to
‘Coffee Quality indicator’ on
page 11 for further
information.
If the coffee is to be
consumed immediately, we
recommend switching off
your coffee maker as soon as
brewing is complete.
NOTE: If you switch off your
coffee maker, the coffee
quality indicator will turn off
and reset.
The thermal carafe will keep
the coffee warm in the jug for
up to four hours.
For safety reasons, the coffee
maker will automatically
switch off after two hours.
The anti drip valve will
prevent any remaining coffee
dripping onto the base
recess during serving.
We suggest consuming your
coffee within two hours, after
this time, we suggest brewing
another jug of fresh coffee.
WARNING: The coffee
maker and hot plates are
hot and remain hot for
some time after switching
off.
NOTE:
•
Remember to turn off the
machine when you have
finished.
•
Allow the unit to cool.
•
Remove the permanent filter
and empty the used coffee
grounds. Wash the filter
7
L
M
47060 rev5_47060 Rev 1 20/09/2011 12:24 Page 7
