background image

4

4

BEFORE FIRST USE

Before using the appliance for
the first time, fill with water, boil
and pour away.

OPERATING THE 
APPLIANCE 

1

Wherever possible fill through
the spout, as this helps to free
the filter from limescale build-
up.

IMPORTANT: When filling from a
tap, care must be taken to avoid
striking the glass body on the
tap.

Always ensure that the level of
water in the kettle is filled to at
least the minimum level shown
on the water level indicator. 

Boil only as much water as you
need as this saves electricity.

2

Place the kettle on the base
unit, ensuring the kettle locates
on to the 360° connector.

The 360° connector allows the
kettle to be located at any
position. - ideal for left and right
handed users and for
convenient positioning on
worktop.

3

Plug in and switch on at the wall
socket.

4

Switch the kettle on. The kettle
glass body, will light up.

5

When the water boils the kettle
will switch off automatically.

If you are using the kettle for the
first time, pour away the boiled
water and refill.

6

Lift the kettle from the base unit
by the handle ensuring you hold
the kettle level. 

To re-boil, switch to ON again. If
the kettle has just switched off
wait a minute or so before
switching it back on again.

If you do not put in enough
water, or switch on the kettle
when it is empty, the safety cut-
out will switch off the power
automatically. If this happens,
refill and wait a few minutes for
the element to cool, then use as
normal.

Filter removal 

1

Open the lid using the release
button 

¤

.

2

Lift the filter upwards to remove.

3

To refit the filter, slide it into the
side guides of the filter holder
until it clicks into place. Ensure
the filter is correctly located.

WARNING: Unless the
filter is fitted correctly,
the kettle lid may not
close and the kettle may
not switch off after
boiling.

U

UK

K  H

He

ellp

plliin

ne

e  0

08

87

70

0  0

06

60

0  2

26

61

11

1      

R

Re

ep

plla

ac

ce

em

me

en

ntt  P

Pa

arrtts

s  0

08

87

70

0  1

16

67

7  6

66

64

42

2

IIrre

ella

an

nd

d  H

He

ellp

plliin

ne

e  1

18

80

00

0  4

40

09

91

11

19

9

43127 rev1  23/3/07  10:04  Page 6

Содержание 43127 ILLUMA GLASS KETTLE







Отзывы: