Operation
Lid operation
Press the lid release button, the lid is
spring loaded and will rise up on its own.
In the upper position the lid will lift out of
its guides at the back for easy cleaning. To
replace, locate in the guides and slide back
into position. Close the lid by pressing
down in the centre and ensure locking
catch
„
is fully engaged.
Basket operation
The handles are removable so they can
be attached to the 2 small or 1 large basket.
Attaching the handle to a basket
Rest the basket on a level firm surface,
locate the handle into the slots of the
basket and pull upwards against the spring
force.
Removal of handles
Rest the basket on a level firm surface,
press the handle down against the spring
force and remove.
Location of basket to drain
With the lid open and in the vertical
position, the basket can be raised into the
rest draining position or removed
completely.
When in the draining position the basket
handle is automatically locked on the
basket rest lip (shown by arrow). When
lowering the basket back in, ensure the
basket handle locates into the guide rails on
the front cover of the fryer, this will put the
basket into the rest position. Press the the
basket release button to allow the basket to
lower into the cooking position in the oil.
When using the large single basket both
basket release buttons must be pressed to
allow the basket to lower into the oil.
Preparing the first time
Refer to the assembly sequence page 5.
When unpacking the fryer, make sure all
packaging material is removed.
WARNING
:
make sure that your fryer
is disconnected from the electricity
supply.
Remove the frying baskets, non stick
bowl, and lid and wash these by hand in
hot soapy water. Wipe the exterior and
interior of the body of your fryer with a
damp cloth.
4
