8
Last station memory function
1
The frequency of the last station tuned to before switching off the unit will be
stored in the memory. When the unit is switched on again, it will receive this
station in the respective waveband. When you are changing the waveband, the last
station tuned on each waveband will also be stored in memory.
Setting the alarm time
1
When the radio is set in the off position, the display will show the clock time.
(Ensure time 1 is displayed).
2
Press the Alarm button 1 or 2 (a) for the alarm
setting, the alarm icon
,
or
,
will flash on
the display.
Choose
radio or
buzzer as your choice of
alarm by repeatedly pressing of the alarm button.
This applies to alarm 1 and 2.
3
Set the required alarm time with the Up/hour button
and Down/minute button (b).
4
A single press of the respective button advances the
setting by one hour or one minute respectively; if the button is pressed constantly
the settings advance rapidly.
5
While the display is flashing you must set the alarm. After the display stops
flashing, the alarm is set. Press Alarm 1 or 2 button three times, and the
relevant alarm function will be cancelled.
6
When the clock reaches the alarm time, the alarm will sound. Press any key to
stop the alarm. The alarm will sound again 24 hours later. To cancel the alarm see
point 5.
Note: alarm 1 and alarm 2 cannot be set at the same time.
Note: The alarm will sound at the time shown on the display.
a
b
