8
1
Remove the Lid
(2)
, by pulling the ring pull to one
side and lifting upwards. Fill your kettle with the
desired amount of water.
2
Replace the Lid. The bevelled arrow on the Lid
points forward towards the Spout
(4)
. Ensure the
Lid is secured correctly into place before use.
Using your
kettle
Before using your kettle, or if it has not been used for over a week,
follow these instructions to boil the maximum amount of water, then
discard to ensure the system is clean and ready for use.
The following instructions detail the steps to follow to use your kettle. For cancelling/changing
the selected temperature function, switching the kettle off and cleaning instructions,
see the following pages.
When plugging your kettle in at the socket for the first time, it will beep twice and the indicator lights
(14)
will all flash briefly. The lights will then dim indicating that the kettle is in standby mode and
ready to use.
5
Select the desired temperature by placing your
finger across one of the temperature icons for 2
seconds. All indicator lights
(14)
will dim except the
temperature selected. The selected icon will begin
to flash until the temperature is reached. The
kettle glass body
(6)
will also illuminate.
6
Whe the desired temperature is reached, the
indicator light
(14)
will stop flashing and remain
illuminated and the glass body
(6)
will dim. Allow
a few seconds before pouring into a vessel.
CAUTION:
HOT.
3
Place your Kettle onto the 360º Connector
(8)
on
the Cordless Base
(7)
.
4
Tap the on/off Icon
(9)
to exit standby mode. All
indicator lights
(14)
will illuminate.
